Maintenance Of Solid Wood Dining Chairs

The biggest advantage of the solid wood chair lies in its natural wood grain and varied natural colors. Since solid wood is a constantly breathing organism, it is recommended to place it in an environment with suitable temperature and humidity. At the same time, avoid placing beverages, chemicals or overheated objects on the surface, so as not to damage the natural color of the wooden surface. If it is made of melamine board, when there is a lot of dirt, use a diluted neutral detergent and warm water to wipe it once, and then wipe it with clean water. Remember to wipe off the residual water stains with a soft dry cloth, and then wipe it completely , and then use maintenance wax to polish it, even if you're done, only by paying attention to daily cleaning and maintenance can the wooden furniture last forever.
Maintenance and maintenance of solid wood dining chairs
1: Pay attention to the cleaning and maintenance of the surface of the dining table and chairs. Regularly wipe off the floating dust on the surface with a pure cotton dry soft cloth. Every once in a while, wipe the dust on the corners of the dining table and chairs with a wet cotton thread that has been wrung out, and then use a clean dry soft cotton cloth to remove the dust. wipe. Avoid using alcohol, gasoline or other chemical solvents to remove stains.
2: If there are stains on the surface of the dining table and chairs, do not rub them vigorously. You can use warm tea to gently remove the stains. After the water evaporates, apply a little light wax on the original part, and then rub it lightly several times to form a protective film.
3: Avoid scratches by hard objects. When cleaning, do not let the cleaning tools touch the dining table and chairs. Usually, pay attention not to let hard metal products or other sharp objects collide with the dining table and chairs, so as to protect the surface from scratches.
4: Avoid humid environment. In summer, if there is flooding indoors, it is advisable to use thin rubber pads to separate the parts of the dining table and chairs that are in contact with the ground, and at the same time keep a gap of 0.5-1 cm between the parts of the dining table and chairs that are against the wall and the wall.
5: Keep away from heat sources. In winter, it is best to place the dining table and chairs about 1 meter away from the heating current to avoid long-term baking, which will cause local cracking of the wood, deformation and local deterioration of the paint film.
6: Avoid direct sunlight. Try to avoid long-term exposure of the dining table and chairs to the whole or part of the outdoor sunlight, so it is best to place them in a place where they can avoid sunlight. In this way, the indoor lighting is not affected, and the indoor dining table and chairs are protected.